Skip to main content

Why do most startups fail?

If you stop to think about it, this is quite surprising. After all, entrepreneurs who choose to found a startup are usually bright, confident, and willing to take on risks . Even though they know that the startup mortality rate is so high, they are happy to challenge the existing players in the market, because they feel they can do a better job than the incumbents.

They're well-informed and expert, and the very fact that they've been able to raise money from funders means they are charismatic and can do a good job convincing mature investors that they have a dream which is worth backing. Also, one would expect that the combination of an accomplished , ambitious hard-working founder who has considerable domain expertise, along with seasoned investors with deep pockets should make for a winning combination !

Reason 1: Market Problems

A major reason why companies fail, is that they run into the problem of their being little or no market for the product that they have built. Here are some common symptoms:

There is not a compelling enough value proposition, or compelling event, to cause the buyer to actually commit to purchasing. Good sales reps will tell you that to get an order in today’s tough conditions, you have to find buyers that have their “hair on fire”, or are “in extreme pain”. You also hear people talking about whether a product is a Vitamin (nice to have), or an Aspirin (must have).

The market timing is wrong. You could be ahead of your market by a few years, and they are not ready for your particular solution at this stage. For example when EqualLogic first launched their product, iSCSI was still very early, and it needed the arrival of VMWare which required a storage area network to do VMotion to really kick their market into gear. Fortunately they had the funding to last through the early years.

The market size of people that have pain, and have funds is simply not large enough

Reason 2: Business Model Failure

As outlined in the introduction to Business Models section, after spending time with hundreds of startups, I realized that one of the most common causes of failure in the startup world is that entrepreneurs are too optimistic about how easy it will be to acquire customers. They assume that because they will build an interesting web site, product, or service, that customers will beat a path to their door. That may happen with the first few customers, but after that, it rapidly becomes an expensive task to attract and win customers, and in many cases the cost of acquiring the customer (CAC) is actually higher than the lifetime value of that customer (LTV).

The observation that you have to be able to acquire your customers for less money than they will generate in value of the lifetime of your relationship with them is stunningly obvious. Yet despite that, I see the vast majority of entrepreneurs failing to pay adequate attention to figuring out a realistic cost of customer acquisition. A very large number of the business plans that I see as a venture capitalist have no thought given to this critical number, and as I work through the topic with the entrepreneur, they often begin to realize that their business model may not work because CAC will be greater than LTV.

The Essence of a Business Model

As outlined in the Business Models introduction, a simple way to focus on what matters in your business model is look at these two questions:

  • Can you find a scalable way to acquire customers
  • Can you then monetize those customers at a significantly higher level than your cost of acquisition

Thinking about things in such simple terms can be very helpful. I have also developed two “rules” around the business model, which are less hard and fast “rules, but more guidelines. These are outlined below:

The CAC / LTV “Rule”

The rule is extremely simple:

CAC must be less than LTV

To compute CAC, you should take the entire cost of your sales and marketing functions, (including salaries, marketing programs, lead generation, travel, etc.) and divide it by the number of customers that you closed during that period of time. So for example, if your total sales and marketing spend in Q1 was $1m, and you closed 1000 customers, then your average cost to acquire a customer (CAC) is $1,000.

To compute LTV, you will want to look at the gross margin associated with the customer (net of all installation, support, and operational expenses) over their lifetime. For businesses with one time fees, this is pretty simple. For businesses that have recurring subscription revenue, this is computed by taking the monthly recurring revenue, and dividing that by the monthly churn rate.

Because most businesses have a series of other functions such as G&A, and Product Development that are additional expenses beyond sales and marketing, and delivering the product, for a profitable business, you will want CAC to be less than LTV by some significant multiple. For SaaS businesses, it seems that to break even, that multiple is around three, and that to be really profitable and generate the cash needed to grow, the number may need to be closer to five. But here I am interested in getting feedback from the community on their experiences to test these numbers.

The Capital Efficiency “Rule”

If you would like to have a capital efficient business, I believe it is also important to recover the cost of acquiring your customers in under 12 months. Wireless carriers and banks break this rule, but they have the luxury of access to cheap capital. So stated simply, the “rule” is:

Reason 3: Poor Management Team

An incredibly common problem that causes startups to fail is a weak management team. A good management team will be smart enough to avoid Reasons 2, 4, and 5. Weak management teams make mistakes in multiple areas:


  • They are often weak on strategy, building a product that no-one wants to buy as they failed to do enough work to validate the ideas before and during development. This can carry through to poorly thought through go-to-market strategies.
  • They are usually poor at execution, which leads to issues with the product not getting built correctly or on time, and the go-to market execution will be poorly implemented.
  • They will build weak teams below them. There is the well proven saying: A players hire A players, and B players only get to hire C players (because B players don’t want to work for other B players). So the rest of the company will end up as weak, and poor execution will be rampant.


Reason 4: Running out of Cash

A fourth major reason that startups fail is because they ran out of cash. A key job of the CEO is to understand how much cash is left and whether that will carry the company to a milestone that can lead to a successful financing, or to cash flow positive.

Milestones for Raising Cash

The valuations of a startup don’t change in a linear fashion over time. Simply because it was twelve months since you raised your Series A round, does not mean that you are now worth more money. To reach an increase in valuation, a company must achieve certain key milestones.

What goes wrong

What frequently goes wrong, and leads to a company running out of cash, and unable to raise more, is that management failed to achieve the next milestone before cash ran out. Many times it is still possible to raise cash, but the valuation will be significantly lower.

When to hit Accelerator Pedal

One of a CEO’s most important jobs is knowing how to regulate the accelerator pedal. In the early stages of a business, while the product is being developed, and the business model refined, the pedal needs to be set very lightly to conserve cash. There is no point hiring lots of sales and marketing people if the company is still in the process of finishing the product to the point where it really meets the market need. This is a really common mistake, and will just result in a fast burn, and lots of frustration.

However, on the flip side of this coin, there comes a time when it finally becomes apparent that the business model has been proven, and that is the time when the accelerator pedal should be pressed down hard. As hard as the capital resources available to the company permit. By “business model has been proven”, I mean that the data is available that conclusively shows the cost to acquire a customer, (and that this cost can be maintained as you scale), and that you are able to monetize those customers at a rate which is significantly higher than CAC (as a rough starting point, three times higher). And that CAC can be recovered in under 12 months.

Reason 5: Product Problems

Another reason that companies fail is because they fail to develop a product that meets the market need. This can either be due to simple execution. Or it can be a far more strategic problem, which is a failure to achieve Product/Market fit.

Most of the time the first product that a startup brings to market won’t meet the market need. In the best cases, it will take a few revisions to get the product/market fit right. In the worst cases, the product will be way off base, and a complete re-think is required. If this happens it is a clear indication of a team that didn’t do the work to get out and validate their ideas with customers before, and during, development.

Reason 6: Ignoring Prospective Customers

It has always been difficult for startups to decide on whether to work on their product towards perfection or let the market test it first. Well, talking to customers about ideas and improvements is always going to work to some extent, but this might lead startups to having almost no profit at all.

The foundation of startup-success is based on validating the market and if you fail to come up with a good product, your startup is surely going to fail. The best possible way to make sure everything works well is by measuring, tracking, validating and optimizing the data that you receive from your customers or clients.

Comments

Popular posts from this blog

Best Online SEO Tools for Links, Keywords and Rank Tracking

We’re always on the lookout for great tools and with a $5 billion industry, SEO is one market that has a ton of tools to help you. Whether you’re researching you or your competitors’ backlinks, trying to identify keywords and cocurrence terms, or simply trying to monitor how your site is ranking, here are the most popular SEO tools and platforms on the market.
Some key features of search engine optimization platformsMonitoring Keyword Rankings – the ability to enter keywords and then monitor their ranking over time is a core feature of most of the platforms. Given that search results are mostly personalized, this ability is largely used for overall trending analysis to see whether the efforts you’re making are improving your ranking on keywords or not.Local Keyword Rank Monitoring – since the location of the search user and your business can play a huge role, many of the keyword monitoring platforms provide a means to track your ranking by geographic location.Keyword Discovery – whil…

How to use Keywords in Website Search Engine Optimization (SEO)

A keyword is a term that is used to match with the query a person enters into a search engine to find specific information. Most people enter search phrases that consist of two to five words. Such phrases may be called search phrases, keyword phrases, query phrases, or just keywords.

SEO Keywords are the phrases in your web content that make it possible for people to find your Website via Search Engines. A website that is well optimized and offer relevant content might get higher search engine organic ranking.

These days, keyword optimization, due to keyword Spamming in the past, has been reduced in importance by search engine like Google. It’s purpose is only to tell search engine that, for example, this page is about XX, and you want them to include it in their search results when people search for XX and variations of XX. Lessening the importance of keywords is very different from disregarding them altogether though.

These are the issues you should consider during your Website SEO P…

SEO Tips for Affiliate Website

Nowadays, search engine's organic ranking is much harder, especially for an affiliate marketing website. So how do you get higher organic ranking? The SEO Strategy can be different from site to site, but some of the standards remain the same regardless of the topic or niche.Here’s How To Do SEO For An Affiliate Website That Gets Higher Search Ranking:Branded Domain Names
Choosing a strategic domain name that represent your affiliate business is not just a task for those starting up their own businesses. For many, the decision to launch your own affiliate website comes many years after you’ve already built a profitable affiliate business. Use a keyword rich domain name, but avoid looking spammy.Shopify Have a list of 10 free tools can help you choose a great domain name.Keyword Strategy
Keyword Strategies are essential to develop a search engine optimized website. The best keyword strategies rely on highly relevant keywords & placement on important parts thought your affiliate …